Solar Roof Mounting Systems
- Product Type: Roofing Mounting Systems
- Product Model: SPC-RF-IK10-DR
- Material: Steel,Aluminium alloy
- Max Wind Load : 60 m/s
- Max Snow Load : 1.4 KN / M 2
- Solar Module Orientation: Portait or Landscape
- Application: Tile Roofing Top
The photovoltaic panel installation for tile roof is an economical and simple choice of roof installation systems, suitable for most solar panel installations on roofs. Different installation methods use different hooks to ensure the safety and normal operation of the system. Stainless steel hooks are usually used to hold the solar panels in place. This allows sufficient air circulation at the bottom of the panel to keep the panel cool and run at maximum efficiency.
Hooks are the structural foundation of all tile roof installation system solutions. The iconic curve of the hooks helps them resist swelling, the product resists buckling, and safely and effectively transfer loads into the building structure. Its excellent spanning ability reduces the number of necessary roof accessories, thereby reducing material costs and installation time.
The photovoltaic tile mounting system with hooks are made of stainless-steel SUS 304 and has been treated to prevent structural corrosion and improve overall aesthetics. Each component is designed to adapt to the structural and environmental conditions specific to your geographic area.
Feature of photovoltaic panel installation for tile roof, SPC-RF-IK10-DR:
1. Factory direct delivery, fast delivery;
2. Made of high-strength stainless steel SUS 304;
3. The height is fixed or adjustable;
4. There are many bolt holes, and wood screw mounting holes can be selected;
5.Landscape or portrait position;
Instructions for photovoltaic tile mounting system with hooks, SPC-RF-IK10-DR:
– Anchor position of roof brackets;
– Install roof hooks to Spanish tile roofing;
– Install aluminum profile on hooks;
– Place solar panels on rails;
– Fix pv panels with end / middle clamps;
The photovoltaic energy mounts for tile roof is an innovative design for installing solar energy on tile roofs, which improves the utilization rate of tile roofs. The development of stent solutions for solar installations installed on the roof and the ground is our driving force. Our company’s bracket components have been designed and tested to withstand extreme weather conditions, and have passed engineering and building code certification.
SPC is a solar components factory for more than 10 years, which also provides solutions for solar projects. Our products covering solar roof system, ground mount system, carport system, etc. If you have any needs, please feel free to contact us: www.solarpartscomponents.com.Welcome to contact www.SolarPartsComponents.com for different tile roofing solar installation kits.
|Photovoltaic Panel Installation for Tile Roof
|photovoltaic energy mounts for tile roof
|Tile Roofing 0 °~ 60°
|SUS304 Stainless Steel, Aluminum Rail
|Stainless Steel / Aluminum T Sliding Nut
|60 m / s
|1.4 KN / M2
|Portrait and Landscape
|JIS C 8955: 2011
|International Building Code IBC 2009
|California Building Code CBC 2010
|Bubble bag+inner box+Carton
|Wooden Box, Steel Pallet, MDF, etc
Features of Photovoltaic energy mounts for tile roof:
- Good anti-corrosion: Due to anodized treatment on surface, the system is not easy to rust. It greatly extend the life span of the product, which could be used very long time.
- Durable materials: High quality aluminum and stainless steel, it’s safe and durable ensuring the long time performance and stability.
- Simple to install and easy to use, bring much convenience to you. With high construction efficiency.
- High Pre-assembly: Save labor costs and time at the installation site.
- Strong strength: Can be used in extremely harsh conditions.It must meet your target strength, such as wind load and snow load.
- Lightning protection：Ensure the whole solar mounting system ground, protecting it from lightning damage.
- Factory direct sales, higher cost performance.
- Wide application and various types to meet the pv mounting installation.
photovoltaic panel installation for tile roof factory
” Hello, photovoltaic panel installation for tile roof factory.
We have one project to quote:
Project 990.000 W.
Tipe of panel : CS6X (attached file)
Qty : 3300 panels
qty of fixing: 55
Solar Roman Tile Roof”
Please refer to our design for 6×10 array section photovoltaic panel installation for tile roof.
Just let me know if they need any modification.”
I will proceed prices offer if they are workable.
The draws are ok, please send us a quote.
” Thank you for your fast response.
Please refer to our quotation for the photovoltaic panel installation for tile roof system.
Any questions,just let me know.
Photovoltaic panel installation for tile roof factory”
Solar Roof Mounting System-SPC-RF-IK10-HR
Stainless steel hook installation steps
Solar Tile Adjustable Hook
Solar Tile Adjustable Hook can be used for solar mounting system installation on sloped residential flat tile roof or curved (Spanish, S tile) tile roof. The tile hooks are compatible with most common rails and made of 304 stainless steel. The tile roof hook is more popular for its adjustable height design in solar tile roof. We received many inquiries about it. It has high strength and resistant rust. So that it is suitable for any country.
Features of the Solar Tile Adjustable Hook
Factory directly delivery with fast delivery;
Made of high strength stainless steel 304;
Height fixed or adjustable are available
Wider distance of bolt holes to avoid splitting rafter