Site icon Solar Parts and Components Factory Direct

Project case for Solar Ground Mounting Systems – ” N ” type

solar ground mounting system case N type

solar ground mounting system case N type

solar ground mounting system case N type

This is one of our project detail for our ” N ” type solar ground mounting system .

The PV modules panel can be adjusted tilt from 5 degree to 45 degree .

This case sample for ground mount structure ” N ” construction with solar panels in portrait array :

1. The size of the solar panels will be approximately 1640 mm X 992 mm X 40 mm ;

2. Total of eight monocrystal solar panels, sixty cells ;

3. Each panel is 280 Watts ;

4. Panels to be placed two up / vertical and ten accross / horizontal

5. There is no snow issue with strong winds in our installation site. Only during storms we have strong winds. So maybe use 40 – 50 for wind load in design is
acceptable .

6. Concrete base option ;

7. Lowest height from the ground to be approximately 24 inches ;

8. Goes with twenty-five degree angle;

9. The location is close to the ocean, salt spray testing should be considered .

More advantanges of our “N” type solar ground mounting system :

(1) Stable & safety in structrual mechanics ;

(2) Fits for flat ground places such as backyards, patio , grassland , open field or flat roof top …

(3) Pure ALU 6005 T5 & 304 stainless steel material guarantee , anti-corrosive / long time / reliable .

(4) Bearing :1.4 KN / Square Meter for Snow loading / up to 42 Meter / Second for Wind Loading design ;

The case in this N type solar ground mounting systems , it’s convenient and quick to install , zero cost for maintenance .

Welcome get more details from www.SolarPartsComponents.com for this aluminium solar mounting system .

Exit mobile version