Metal Roofing Solar Mounting Systems U Rail

Q:

Hey guys putting on 150 panels and looking for a Rack system to add to my roof – I have plenty of room and would like it designed for 6 sets of 25+/- – Going to put on 25 panels to a block and leave 4 feet of space between blocks – This way I can service and clean them

I have attached the type of roof and need a strong mounted rack – I am in a hurricane zone – Also can you send me a quote so I can order it also please include all clips and fasteners and all parts

I have attached pictures of my metal roof for your review

A:

Nice to receive your solar panel mounting details .

We recommend you use our Metal Roofing Solar Mounting Systems U Rail for this project .

What’s the span length of your metal roof ridges ?

Since we have to customized made these U rails depends on this size specification .

If you have roof structure drawing that would be great .

You have wood below the ridges, right ?

For hurricane zone,

we recommend you use our longer self-tapping screws,

So that they can penetrate roof beams , and offer very strong strength for typhoon resistance .

Waiting for your more information.

Metal Roofing Solar Mounting Systems U Rail

Q：

Hi,

I am the general partner at solar energy in Canada.  I am looking for a

supplier for PV mini-rails.  What is the length of your mini U-rail?

What is the minimum purchase quantity, and what is the price without

the screws (just the mini-rail and the EDPM pad)?

What is the price for the mid clamps?

Ralph Doncaster

A：

Hi Mr. Ralph

Appreciated for inquiry about our mini-rails.

Our standard length is 280mm,  please find attached price list for the mini rail and mid clamp. Could I know how much quantity you would need?

If you would share me your delivery address, my pleasure to check freight for you too.

FYI

Mini rail

A：

Hi Mr. Ralph

Like to quick make sure you have received my offer well.

If you could let me know your purchase quantity, we can re-evaluate price offer for you.

We also can customized length base on clients’ requirements.

FYI

380mm size we made for one of our clients:

380mm mini rail

Q:

Where can l buy solar mounting U rail?

A:

Nice to receive enquiry about our U aluminum rail component, standard length is 30cm (12″)

How many Units you would need ? I can caculate express cost for you if necessary.

If you can share me more requirements of your project, my pleasure to assist you always .

Q:

Do you offer a clamp between two panels?

What is the price with freight of 1000 rails, 68end clamps, and 200 mid clamps.  How much shipping time do we need to allow?

A:

Please refer to invoice for this sample order including express cost .

The leading time can be 7-10 days against payment .

FYI,

One project case for our metal roof mounting for U rail .

By the way, I found I have no full contact & delivery information , can you update for me ?

Q:

I could not open the estimate, would you please re-format.

A:

Please refer!

Metal Roofing Solar Mounting Systems U Rail

solar U rail assembly instruction, railless installation:

More details, kindly check>>>

Q:

Desr Sirs,

Metal Roofing Solar Mounting Systems U short Rail

A:

Q:

Hello,

We are looking for these clamp for Solar Metal Roofing Installation – U Rail

install metal roof with U rail clamp kits

What is price/ pcs with railing and holders + bolts and screws? What is the minimum order?

Could you ship this small qauntitie? What is delivery time

I need mid / end clamp holder for 35mm of hight –100 – 150 units for testing;

mid and end clamp holder for for Solar Metal Roof Installation

U short railing (Railless clamps) 250mm – 100 pcs;

U railing 250mm

If quality good, we’ll place much bigger quantities.

——————————–
General Manager Justin Gribovski
Mob. + 370 699 49992

A:

Dear Justas

Nice to receive inquiry about our U rail clamp kits.

As per holder for 35mm thickness solar panels you need :

(1) Mid clamp holder ;

(2) End clamp holder ;

(3) Our Metal roofing U clamp kit includes :

1) one piece of aluminum rail clamp (250 mm in length) ;
2) two pieces of EPDM pads ( Pre-adhered on the back of clamp) ;
3) two sets of screws, rubber washer;

U rail clamp kit, railless clamp bracket for solar installation

U rail clamp , we have two length for options :

– 250mm;
– 280mm;
– Customized length available base on different roof mounting projects

Following is our finished photos of this railless clamp for solar metal roof installation for export.

railless clamp for solar metal roof installation

Thank you and waiting for your reply .

Have a nice day.

Best regards,

U Short Rail for Solar Metal Roofing

Yes, following is frameless bifacial PV module mount with U rail.

More details,kindly check>>>

Yes,  our U shaped clamp can be used for  metal roof solar mounting system,

besides it’s rail less type, greatly save cost.

More details, kindly check >>>

The lightweight U-shaped guide rail is used with most trapezoidal roofs,

which can be installed quickly, saving cost and time.

More details, kindly check >>>

This post is mainly about how U rails are installing solar panels on metal roofs.

Clik here to find the answer >>>

It provides the best installation accessories for the solar installation system, the solar aluminum rail structure is stable and strong.

More details kindly check >>>

More details kindly check >>>

https://www.solarpartscomponents.com/solar-panel-metal-roof-mounting-u-rail-880kw-project

More details kindly check >>>

https://www.solarpartscomponents.com/solar-trapezoid-metal-roofing-rail-brackets-u-clamp

More details kindly check >>>

U rail clamps is a kind of very convenient installation type for metal roofing .

Date sheet for Metal Roofing Solar Mounting Systems U Rail

More details kindly check>>

Data Sheet for Metal Roof Mini U Rail Solution