Good quality Q235 carbon steel mounting kits are widely used for PV solar panel installation .
High efficient but competitive than aluminum structures .
By using A3 carbon steel as ground solar photovoltaic installation solution , the thickness of galvanization treatment is up 80 μm .
So that it can guarantee 10 years up anti-rust for outdoor environment .
Optimized design can help saving labor and material cost , all of our mounting kits are pre-assemble which can save freight cost
and improving construction efficiency on the solar project site.
Feature of our carbon steel systems :
(1) High Quality Componnets with strict QC procedure ;
(2) Practical and reasonable solar panel ground structure design ;
(3) Q235 (A3) carbon steel support, sturdy, water-proof ;
(4) “Pre-ready” packing , quick installation at site .
Technical Parameters For This Carbon Steel Mounting Kit :
| Configuration | Horizontal, vertical |
| Column | 85μm Carbon steel |
| System installation angle | 10 °, 15 °, 20 °, 25 °, 30 ° |
| Material of main system part | Q235 Carbon steel |
| Sub keel | Q235 Carbon steel |
| Main keel | Q235 Carbon steel |
| Inclined support | Q235 Carbon steel |
| Compacted yard | Aluminum alloy |
| Wind load | 38 m/s |
| Snow load | 60 cm |
| Quality assurance | 10 years |
| Component type | Framed, non-framed |
Welcome get more details from www.SolarPartsComponents.com for this carbon steel solar mounting system .
