solar mounting kits factory, wholesale prices, small order acceptable

Do you accept small order for SOLAR MOUNTING KITS ?

”

Dear Sir or Madam,

We are a University in Ljubljana, Slovenia, working in reliability research of PV modules.

I am writting to you regarding a small order of mounting kits for solar panel mounting.

Is it possible to order in small quantities from you with shipping to Europe.

If no, do you have a distributor in Europe, who could do so?

If yes, I kindly ask for quotation for the items listed as below:

(1)We need to install several frameless modules to our test site and we need good clamps.

First I would just like to double check, that the clamp is suitable for framless modules with thickness between 3 and 8 mm.

Please confirm.

(2)Preferred length of the thread for the first set of 100 pcs is 32 mm, but could be in the range between 30 to 35 mm.
For the second set of 100 pcs the length should be around 60 mm or a bit less. Here is the picture:

(3)
I wanted to ask for M8 nuts with washers and not bolts.

So instead of M8 bolts with washers can you send 200 pcs of M8 nuts with washers:

– Hex Nuts for M8 Screws and Bolts, Stainless Steel

Hex Nuts for M8 Screws and Bolts, Stainless Steel

Hexagon Nuts M8, SUS304 Stainless Steel Made, SPC-F-N108
Product Description: Hex nuts are very popular fasten hardware with hexagonal shape. Our M8 hex nuts is made of A2-70 stainless steel, the internal screw thread is M8×1.25mm, these fasteners are very little magnetic comparing other regular steel material.. Our 5/16″-18 metric hex nuts comply with DIN934 standards, with six sides hexagon style. www.solarpartscomponents.com

– Serrated Lock Washers for M8 Screw and Bolt sizes, SPC-F-W208

Serrated Lock Washers for M8 Screw and Bolt sizes, SPC-F-W208

Serrated lock washers SUS304 stainless steel made for M8 screws and bolts, SPC-F-W208 – SOLAR PARTS & COMPONENTS
Product Description: Stainless serrated lock washer is a kind of steel metal hardware with conical shape prevent loosen in vibration or dynamic condition.. SUS304 made serrated washers for M8 bolts and screws can used for automotive, engineer, machine, new energy industry…
www.solarpartscomponents.com

The address on the invoice should be:

UL FE
attn: dr. Matevz Bokalic
Trzaska 25
SI-1000 Ljubljana
Slovenia

VAT no: SI11015489 (must be written on the invoice)

Thank you and best regards,

Matevz Bokalic

“

Dear Bokalic

You can directly buy these solar mounting kits and parts from our factory, prices for unit have sent email to you.

(1) 80mm length end clamp (Silvery color) ;
Yes, our clamps can fit 3-8mm thickness solar panels.