Triangle Tilt Solar Mounting System, fixed 25° , 10.4 KW, Arab project

Solar Panel Triangle Aluminum Mounting System, 10.4 KW Arab Project

As a professional PV modules mounting hardware factory, we can offer several pre-ready installation structures for different
situation such as roofing , grounding , floating seaside, vehicle tops, boat decks …

Following is one of our tripod A frame mounting system for metal roofing project .

The mounting place locates in Riyadh, which is capital of Saudi Arabia .

(1) The total installed capacity for this solar engergy system is 10.4 KW ,
Using 32 units of polycrystalline PV modules, 325 Wp,
Size 1954mm x 990mm x 40mm ,
Module orientation is portrait arraying ;

(2) The roof structure is flat concrete roof ,
PV module Array:
1 Row x 4 Columns (4 units of solar panels) per set,
totally 8 sets;

(3) Since Riyadh belongs to tropical desert climate ,
there is no necessary to consider Snow loading parameter,
the wind loading is 30 M / S for this project ;

Base on specification:

Site address – Riyadh, Saudi Arabia
+
Type of System – Rooftop PV system
+
Solar panles – 32 units of 325 Wp polycrystalline silicon type
+
Max system size : 10.4 KW
+
Concrete roof

we choose fixed triangle 25 Degree aluminum bracket system for this metal roof mounting order .

The BOM ( Bill of Material ) is as following :

(1) Aluminum Rails, 4200 mm in length, 16 units ;

(2) Mid clamps 48 units ;

(3) End clamps 32 units ;

(4) 25° fixed tilt triangle bracket 24 units ;

(5) M10*80 Expansion Bolts 48 units;

(6) Stainless Grounding Clips 48 units ;

(7) Copper Grounding Lugs 16 units ;

This 10.4KWp Rooftop PV System in Riyadh is a cost and labor effeictive system for flat roofing installation .

Welcome get more details from www.SolarPartsComponents.com for this triangle solar mounting system .