Frameless Solar Module Clamp Rubber Strips
A frameless module has an obvious definition-there is no frame. A dual glass is also pretty self-explanatory–solar cells are sandwiched between two pieces of glasses. So, the material for fasten frameless module should be in a wide range of application.
EPDM is kind of synthetic rubber, which could be used in a wide range of application. EPDM can be formulated to be resistant to temperatures as high as 150 Degrees. And properly formulated, can be used outside for many years or decades without degradation. EPDM also has good low-temperature properties, with elastic properties to temperature as low as -40 Degree, depends on the grade and the formulation.
According to suggestion from our R&D team, we use the EPDM with the same standard as 3M rubber:
Property Value
Coefficient of thermal expansion, linear 160um/(m.K)
Maximum service temperature 150℃
Minimum service temperature -50 ℃
Glass transition temperature -54 ℃
Adjustable clamps with high quality epdm rubber pads inside can protect thin film PV panels from breakage.
Our mid / end clamps can work with most of frameless panels well from 5 – 10 mm in thickness.
Solar panel EPDM pads for frameless panel clamps is durable with Grade A material and 10 years warranty.
Frameless module clamp rubber strips help protect solar panels from potential damages.
Large stock warehouse can guarantee farmless bifacial PV module clamps deliver in short time .
solar panel EPDM pads for frameless panel clamps press solar frameless panels and prevent cracking solar modules with rubber mats inside.
8cm / 12cm / 15cm length available for unframed panels.
EPDM: Ethylene Propylene Diene Terpolymer Rubber;
When come with isolation, watertight purpose in solar mounting structure, there comes EPDM rubber. More details, pls visit our website: www.solarpartscomponents.com