Solar Metal Roofing Mounts
- Product Type: Roof Mounting Systems
- Product Model: SPC-RF-CK021-HR
- Material: Aluminium, Steel
- Max Wind Load : 60 m/s
- Max Snow Load : 1.4 KN / M 2
- Solar Module Orientation: Portait or Landscape
- Application: Rooftops
Product Description:
Mounting clamps or brackets can be very cost effective for solar panel metal roof sheet installation.
Many Factory roofs are built of metal sheets, it’s a very good idea to equip with pv modules on the top.
Our SPC-RF-CK021 clamps can help installing photovoltaic panels efficiently and save cost.
No necessary to pre-drill hole and penetration before installation, easy and quick install directly.
Features of this PV Module racking system with metal roof clamps SPC-RF-CK021 :
– Suitable for large scale industrial and commercial metal rooftops;
– Fast mounting, install without pierce of roof surface;
– Al6005-T5 aluminum in material, reduce roof weight loading;
– Anticorrosive with anodized fine finishing;
– Application: solar panel mounting, signs, awning…
Parts and Components for solar metal roof structure:
– Fixation Parts – diamond shaped clamps;
– Horizontal mounted type aluminum rails;
– Splices;
– Mid or end clamps;
Installation steps for this solar roof mounting system SPC-RF-CK021-HR:
(1) Tighten Clamps by screwing bolts, don’t need drilling on rhombic roof;
(2) Fasten H rails on diamond-shaped clamps;
(3) PV modules fixed by mid / end clamps;
This model SPC-RF-CK021 roof clamps can be used for diamond-shaped roof type.
These clamps can be retorqueing and reattached if need adjustment.
other shape brackets can be designed for your PV power station.
| Brief Descriptions: | |
| Solar Roof Mounting Systems –Diamond-shaped metal roof clamp+ Rails | |
| Item type: | Solar Rooftop Mounts |
| Type: | SPC-RF-CK021-HR |
| Installation Site: | Metal Roofing 0 °~ 45° |
| Profile Material: | Aluminum Alloy |
| Fasten Parts: | Stainless Steel / Aluminum T Sliding Nut |
| Color: | Anodized Silvery |
| Wind Load: | 60 m / s |
| Snow Load: | 1.4 KN / M2 |
| PV Modules: | Framed, Frameless |
| Module Orientation: | Portrait and Landscape |
| Standards: | AS/NZS 1170 |
| DIN 1055 | |
| GB50009-2012 | |
| IBC2009 | |
| TUV | |
| JIS C 8955: 2011 | |
| International Building Code IBC 2009 | |
| California Building Code CBC 2010 | |
| Warranty | 10 years |
| Designed Lifespan | 25 years |
| Packing Details: | |
| Inner: | Bubble bag+inner box+Carton |
| Outer: | Wooden Box, Steel Pallet, MDF, etc |
Frequently Asked Questions for Solar Roof Mounting System with Metal Roof Clamps
Q1：Can I use SPC‑RF‑CK021‑HR clamps on standard standing‑seam metal roofs?
A：Standard version fits diamond‑shaped rhombic roofs only; custom‑modified clamps required for standing‑seam roof projects.
Q2：Will these clamps slip during strong wind?
A：Slip risk is avoided only when clamps fully grip the raised roof rib and bolts are tightened to proper torque. Partial clamping must be prevented.
Q3：Can I detach and reuse this mounting hardware?
A：Yes. Clamps, rails and clamps can be removed, retorqued and reused as long as no physical deformation occurs.
Q4：Do I need to add extra sealing tape under these clamps?
A：No roof penetration means no sealing tape for penetration holes；you may add protective EPDM gasket between clamp and metal sheet upon request for extra surface protection.
Q5：Does this mounting kit void my metal roof warranty?
A：Non‑penetrating installation will not drill roof sheets; always double‑check requirements from your original roof‑material manufacturer.
Introduce of Solar roof mounts with Metal roof bracket, SPC-RF-CK021-HR
More details kindly check >>>
